SPI – SPI to-MIL-STD-1553 Board

Home > SPI – SPI to-MIL-STD-1553 Board

SPI - SPI to-MIL-STD-1553 Board Driven by an SPI link

Fully functional 1553 BC/RT/MT module with backend PMOD connectivity.

Highly integrated and self-contained module with the 1553 protocol engine, transceiver and transformer for dual-redundant Mil-Std-1553 applications. Out of the box project files for various platforms for rapid prototyping. The BRD1553SPI-P communicates to a host CPU via SPI-over-PMOD and is software compatible with other Sital products and with DDC Enhanced MiniACE devices. The board is designed for extended temperature range of -40°C to +85°C and high mechanical sustainability. It is intended for use by customers who require a simple and cost-effective 1553 module on their system.

The BRD1553SPI-P is offered with a complete, tested and integrated software and IP environment for Xilinx Zynq Ultrascale+ including PicoLinux device drivers and API, Vivado project files and FPGA IP with SPI master to drive the SPI slave interface on the BRD1553SPI-P over PMOD.

Complete Dual-Redundant Mil-Std-1553B/1760 protocol engine ,bus transceiver and transformer
Based on the DES1553XVR 1553 discrete transceiver design
Suitable for any MIL-STD-1553B/1760 BC, RT, MT applications
Works in conjunction with all Sital’s Mil-Std-1553 IP cores BRM1553xxx
PMOD connector for easy CPU connectivity
Triaxial cabling for 1553 bus connectivity
Single 3.3Vdc supply operation
SPI interface when configured as a full protocol engine or LVTTL signaling interface
Less than 0.3W maximum power dissipation during 1553 transmission (1.5W on load)
Xilinx Ultrascale+ rapid prototyping package including: PicoLinux device drivers + code samples, Vivado project files, SPI master FPGA IP for Ultrascale+ with pin mapping over PMOD
32 x 35mm (1.26 x 1.38 inch) for the BRD1553SPI module
RoHS Compliant

APPLICATIONS and Notes:

Excellent for rapid prototyping and evaluation of the BRM1553D/PCI/FE/ERL/D-CS FPGA IP Cores
Excellent for rapid evaluation of the DES1553XVR discrete transceiver design for MIL-STD1-1553B/1760/DIGIBUS/MCair
Optional Device drivers: Linux, VxWorks 7.0, Windows, VxWorks 6.9, Integrity, PikeOS
DO-254 DAL A Compliant

Select a Document below to view a PDF:

BRD1553SPI-P : Product Overview BRD1553SPI-P-CS : Product Overview BRD1553SPI-PMOD Hardware Manual BRD1553XVR and BRD1553SPI Hardware Manual HSID Manual SPI Master IP Core HSID Manual

Select products for quote:

BRD1553SPI-P

MIL-STD-1553 board Driven by an SPI link

Safe and Secure DataBus Solutions

Sital’s cutting-edge, innovative “SnS” Technology is designed for IP Core’s physical layer. Our solutions offer unprecedented cyber security and DataBus fault finder capabilities.

We supply our products with DO-254 and DO-178 certifiability, including DAL A. Our partners: Logicircuit and ConsuNova provide the DO-254 and DO-178 artifacts. Through enhanced physical layer monitoring, the patented “SnS” analyzes all DataBus messages and provides 2 unique capabilities.

Cyber Security

Validate each Bus message and prevent any malicious Bus messages from executing their attack! This includes BC firewall and an option to add “SnS” for cyber security IDS/IPS to new and existing MIL-STD-1553 designs.

Wire Fault Detection

Detect and pinpoint intermittent and continuous electrical faults such as open and short circuits! “SnS” also analyzes the overall health management analysis of the DataBus.

SPI – SPI to-MIL-STD-1553 Board